Light Bulb Base and Shape Finder: A Cheap Replacement Bulb Cross-Reference Chart
light bulb basesLED replacement bulbsbulb sizesfixture compatibilityshopping reference

Light Bulb Base and Shape Finder: A Cheap Replacement Bulb Cross-Reference Chart

CCheapest.Lighting Editorial Team
2026-11-08
7 min read

Use this bulb base and shape chart to match E26, E12, GU10, G9, and bi-pin replacements by fit, voltage, brightness, and dimming.

Buying a replacement bulb is easier when you match the socket, shape, voltage, brightness, and controls—not just the old bulb’s brand. This light bulb base and shape finder explains common fittings such as E26, E12, GU10, G9, and bi-pin formats, then gives you a repeatable checklist for finding affordable LED replacements without buying an incompatible bulb.

Overview

The fastest answer to “What light bulb do I need?” is usually printed on the old bulb, fixture label, or socket. Look for a base code, such as E26 or E12, followed by information about the bulb shape, voltage, wattage, and whether it is dimmable. If the markings are missing, remove the bulb only after switching off power and letting it cool, then compare its base with the chart below.

This guide uses common North American household terminology. Socket names and voltage requirements can vary by country, vehicle, appliance, and specialty fixture, so treat the fixture label as the final authority. Never force a bulb into a socket that does not match.

Base or fittingWhat it looks likeCommon usesWhat to verify
E26Medium Edison screw baseMany table lamps, floor lamps, ceiling fixtures, and outdoor fixturesBulb shape, fixture wattage limit, voltage, and dimming
E12Small candelabra Edison screw baseDecorative lamps, chandeliers, sconces, and some ceiling fansShape clearance, brightness, and whether the fixture accepts LED bulbs
GU10Two short pins with a twist-and-lock baseSpotlights, track lighting, and recessed directional fixturesVoltage, beam angle, physical depth, and dimming
G9Two small looped wire contactsCompact decorative fixtures and some under-cabinet or accent lightsVoltage, heat exposure, dimensions, and enclosed-fixture suitability
G4Two thin pins spaced about 4 mm apartLow-voltage cabinet, display, landscape, and specialty fixturesRequired transformer and operating voltage
G5.3 or MR16 bi-pinTwo pins with a narrow spacingLow-voltage recessed and track spotlightsVoltage, transformer compatibility, beam angle, and heat clearance
G6.35Two pins spaced farther apart than G4Some specialty, task, and decorative fixturesExact pin spacing, voltage, and fixture instructions

The letter generally describes the base style: E indicates an Edison screw, while G identifies a pin or contact-style base. The number commonly refers to a key measurement, but the measurement convention differs by fitting. It is safer to match the complete code than to estimate from the number alone.

What to track

1. Base type and socket fit

First record the complete base code. An E26 bulb is not interchangeable with an E12 bulb, even though both screw into a socket. GU10, G9, and bi-pin bulbs also require the correct contact arrangement. Take a clear photograph of the base and socket before shopping, especially if the old bulb has no readable label.

2. Bulb shape and available space

Base compatibility does not guarantee that a bulb will fit the fixture. Common shape labels include A19 for a standard household bulb, B10 or CA10 for decorative candle forms, G16.5 for globe-style bulbs, BR30 and BR40 for broad reflector bulbs, and PAR formats for directional beams. Shape codes are useful shorthand, but dimensions matter more when space is tight.

Measure the maximum diameter and length available inside the shade or housing. For recessed fixtures, also check whether the replacement needs a particular trim profile. A physically larger LED bulb can touch a shade, sit too low, or fail to fit behind a spring clip even when its base is correct.

3. Voltage and fixture requirements

Check the voltage printed on the bulb, fixture, transformer, or appliance. Many household lamps use line voltage, while G4, MR16, and some other small bi-pin formats are commonly used in low-voltage systems. A low-voltage bulb may require a compatible transformer; do not substitute a line-voltage bulb simply because the pins appear similar.

Also read the fixture label for its maximum wattage and any restrictions on enclosed fixtures, damp locations, or outdoor use. LED wattage is lower than the wattage of many older incandescent bulbs, but the fixture’s labeling and the bulb maker’s instructions still control.

4. Brightness, color, and beam

Compare bulbs by lumens rather than watts when replacing an incandescent bulb. Watts describe energy use; lumens describe visible brightness. If you are unsure how bright the replacement should be, compare the old bulb’s lumen information or use the room guidance in How Many Lumens Do You Need?.

For color, warm white is often chosen for living areas and bedrooms, while neutral or cooler light may suit work areas. The exact appearance depends on the bulb’s color-temperature label and the room. For GU10, MR16, and other directional bulbs, record the beam angle as well as lumens: a narrow beam concentrates light, while a wider beam spreads it across a larger area.

5. Dimming and controls

If the fixture is connected to a wall dimmer, buy a bulb explicitly labeled dimmable and check that the dimmer is compatible with LED loads. A bulb can fit perfectly and still flicker, buzz, fail to turn fully off, or have a limited dimming range. Use the LED Dimmer Compatibility Guide before choosing the cheapest option.

For smart bulbs, check the base, voltage, fixture enclosure, Wi-Fi or hub requirements, and whether the wall switch must remain on. A cheap smart bulb is not a bargain if the control system is incompatible with the fixture or household setup.

Cadence and checkpoints

Keep a small replacement-bulb record in your phone. For each fixture, note the room, base code, bulb shape, voltage, maximum permitted wattage, preferred color, approximate dimensions, and whether it is dimmable or smart. Add a photograph of the socket and fixture label. This turns future shopping into a cross-reference task rather than a guess.

Review the record when a bulb fails, when you move a bulb to another fixture, or when a fixture is renovated. For frequently used fixtures, check your notes quarterly so you can buy matching multipacks rather than accumulating several incompatible spare bulbs. Before placing an order, compare the exact base and shape, not just a product title such as “standard LED bulb.”

When monitoring lighting deals and coupons, save the compatible specifications first and the discount second. Promotions, packaging, and product availability change, but the fixture requirements do not.

How to interpret changes

A lower price is useful only when the replacement still matches the fixture. If two bulbs have the same base and similar brightness, compare their total value: expected service life, energy use, dimming performance, warranty terms, and whether the bulb is suitable for an enclosed or damp location. A multipack can reduce the per-bulb cost, but only if you have several fixtures using the same specification.

If a replacement flickers or turns off, do not assume it is defective immediately. Recheck the voltage, dimmer compatibility, transformer, socket condition, and fixture enclosure. If a bulb becomes unusually hot, smells unusual, shows damage, or does not fit securely, switch off power and stop using it. For hardwired fixtures or uncertain wiring, use a qualified electrician rather than experimenting with adapters.

For outdoor fixtures, confirm the bulb and fixture are rated for the location. The same approach applies to cheap outdoor lighting, motion-sensor fixtures, and solar products: match the fitting and electrical requirements before comparing deals. For room-specific choices, see the guides to cheap kitchen lighting and renter-friendly lighting.

When to revisit

Revisit this finder every time a bulb burns out or a fixture changes, and review your saved replacement list monthly or quarterly if you regularly buy bulbs for multiple rooms. Update it sooner when you install a new dimmer, transformer, smart-home system, ceiling fan, enclosed fixture, or outdoor fitting.

  1. Turn off the fixture and let the old bulb cool.
  2. Record the base code, shape, voltage, wattage limit, dimensions, and control requirements.
  3. Photograph the bulb, socket, and fixture label.
  4. Choose a replacement by fit first, then compare lumens, color, dimming, lifespan, and price.
  5. Keep the package or product details until the bulb works correctly in the fixture.

When you need to compare long-term value rather than shelf price, use the LED Bulb Cost Calculator. The best cheap LED lights are not simply the least expensive package; they are the compatible bulbs that deliver the required light without creating a second replacement problem.

Related Topics

#light bulb bases#LED replacement bulbs#bulb sizes#fixture compatibility#shopping reference
C

Cheapest.Lighting Editorial Team

Lighting Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.